Max Blank’s

I will write more about the locally made eps blanks I use later. Very brief: Locally made eps, laser cut after custom made rocker for (almost) each individual board it will be used for (major shout out to my friends Max and Mats for helping me out with this). Stringer routed from same file, and then glued together with the foam by my hands.

By the way – the board above is my latest edition of a “Torö ripper”. This particular one is a 5’11 x 20” 1/4 x 2” 7/16. Relaxed nose rocker and medium tail rocker with a defined broken/stadged rocker by the outline hips. Medium deep single with a more accentuated double concave in the back part of the board. I love it! Feels both crisp and flowy.

Leave a Reply